Product Description

Part No.:T1065Z 
Description:FUJI XP142 XP143 XP242 XP243 KMF80-20 DAMPER CZPT XP machine parts
Condition: Original new or copy new 

We also can supply you the following CZPT Parts:

QP242E, CP642E, CP742E,CP842E,NXT,XP/QP341 
No. Part No. Description In-stock Qty. Remark Machine 
1 A1037W KSHA6X15-47W 1 Original new parts CP642,CP643 
A1037Y KSHA6X15-72W 1 Original new parts CP742-CP842 
2 A1040Z AMPERFILER,F1RM-04 3 Original new parts QP242 
3 A1042T AMPERFILER,HPX-T1 1 Original new parts CP642,CP643 
4 A1042Z AMPERFILER,HPX-H1-019 2 Original new parts QP242 
5 A1042A AMPERFILER, PX7-CRD 2 Original new parts CP643. 
6 AA20A00 NXT-1.3MM NOZZLE 1 Original new parts NXT 
7 ABHPH8180 QP242 Index Holder Assy. 1 Used QP2 
8 ADBPH8084 QP341 HOLDER 1 Original new parts QP341,QP351 
9 ADBPN8166 QP3 nozzle 10.0 4 Original new parts QP341,QP351 
10 ADBPN8176 QP3 nozzle 15.0 2 Original new parts QP341,QP351 
11 ADBPN8186 QP3 nozzle 20.0 2 Original new parts QP341,QP351 
12 ADBPP8571 PULLEY(=MQC1292) 2 Original new parts QP242 
13 ADBPP8571 PULLEY 10 Original new parts QP242 
14 ADCPH3110 HOLDER ASSY 22 Original new parts CP742 
15 ADCPH3130 ROD,JOINT ASSY.( =ADCPH3412),1St. 5+4 Original new parts CP742,CP743,CP842 
ADCPH3140 ROD,JOINT ASSY.( =ADCPH3452),9St. 5+3 Original new parts CP742,CP743,CP842 
16 ADEPN8651 XP242, HOLDER 3 Original new parts XP241,XP242,XP243 
17 ADGPH3301 SHAFT, CP7-CP8 3 Original new parts CP742,CP842 
18 ADGPH4308 SHAFT ASSY 1 Original new parts CP742,CP743, 
19 ADGPH8011 HOLDER ASSY 4 Original new parts CP842 
20 ADGPM8012 HEAD ASSY,(ADCPM8012,AMPQ8012) 22+2 Original new parts CP742,CP842 
21 AWPH3088 SHAFT ASSY. (AAWPH3086) 7 Original new parts CP642,CP643 
22 AWPH3115 CP6 HOLDER (AWPH3110) 5 Original new parts CP642 
23 AWPH3120 SHAFT SPLINE 3+4 Original new parts CP6 
24 AWPM8571 SHAFT SPLINE 18st. 1 Original new parts CP642,CP643 
25 AYPH3110 CP6-5000 SHAFT ASSY.(AYPH3119) 2 Original new parts CP6-5000 
26 CP7 1.3melf CP7 1.3Melf nozzle 32 Original new parts CP7,CP8, 
27 CP7UV LAMP DCGC-0150 ( UV LAMP-Right) 1 Original new parts CP7,CP8, 
28 CSQC571 ROTARY ACTUATOR 4 Original new parts CP6,CP7,CP8 
29 CSQC5371 CP643 JAW 50+50 Original new parts CP642,CP643 
30 DCPA0172 COUPLING UCN-80B-25X28 4 Original new parts CP742/842 
31 DCPA5710 PULLEY (DCPA1260) 1 Original new parts CP7,CP8, 
32 DCPA571 ROLLER 3 Original new parts CP7,CP8 
33 DCPH0681 VALVE (CP732,CP743) 80 Original new parts CP742 
34 DCPH0742 SHAFT(9pcs+11pcs) 20 Original new parts CP742,CP842 
35 DCPH571 VALVE CP7(DCPH0681) 50 Original new parts CP743 
36 DEEM5392 LAMP, X-71RH 8 Original new parts XP242,XP143 
37 DEEM5461 LAMP, X-91RH 1 Original new parts XP242,XP144 
38 R1009A LAMP 7376AS26 8 Original new parts CP643/QP341 
39 DEPN4090 XP242,Nozzle-10.0mm (ADEPN8651) 3 Original new parts XP241,XP242,XP243 
40 DGPH0090 HOSE ,AIR(=DGPH5650) 31 Original new parts CP7-CP8 
41 DGPH0090 AIR HOSE (DGPH5650) 100 COPY NEW PARTS CP732,CP743, CP842 
42 DGPH0650 SPRING 300 COPY NEW PARTS CP732,CP743, CP742 
43 DNPH3571 HOLDER 2 Original new parts XP242,XP241,XP243 
44 EEAN1830 SERVOPACK , DR2-A5AC-NY41 1 Used QP2 
45 EEAN2150 SERVOPACK , DR2-04AD-Y135 1 Used QP2 
46 EEAN2160 SERVOPACK , DR2-02AD-Y137 1 Used QP2 
47 FH1203C1F FEEDER CARD , XK5710/XK5712 1 Original new parts NXT 
48 FSC-30D CP43/IP3 SCSI CARD 1 Original USED parts CP43,IP3 
49 H10195 BATTERY, ER3V/3.6V 1 Original new parts XP143 
50 H13384 VALVE SOL. SX5320-5MZ-C6-F2-X21 1 Original new parts XP142,/XP242 
51 H3004T FU-2201(3500) 1set Original new parts CP7,CP8 
52 H31811 PLATE END, PBR8FN-203 2 Original new parts CP643 
53 H3181H PLATE END, PBRL6FN 6 Original new parts CP642,CP643 
54 H3181M PLATE END, PBRL8FN 19 Original new parts CP642,CP643 
55 H3181T PLATE END, PBR6FN 33 Original new parts CP642,CP643 
56 H4581A BEARING, BK81571A 31 Original new parts CP742,CP842 
57 HIMV-134 CP643E CPU CARD, HIMV-134 1 Original USED parts CP643 
58 K10571/1571 COUPLING,UCN100B-30X32 3 Original new parts CP642 
59 K1005X COUPLING 2 Original new parts CP742 
60 K1005Z COUPLING 20+12 Original new parts CP642 
61 K1129H XC-55FT WITH LENS(DCGC5710,557102) 1 Original USED parts CP732,CP743, CP742 
62 K11327 IK-54XF, CCD CAMERA POWER 3 Original USED parts CP732,CP742,QP341 
63 M5012A MOTOR, SC-H7A15ZMTR042 2 Original new parts CP643 
64 PQC0300 BELTS, L=2850mm 8 Original new parts CP6, IP3 
65 R1571T 92B-NEXT 2 Original new parts IP3 
66 R1571A UV LMAP MFXL-1000 10 Original new parts QP242 
67 H35715 FIBER UNIT, A10130,R4031E(HPF-T003) 1SET Original new parts ,XP242 
68 S2113H CDQ2D16-10D-F7BV 0 Original new parts CP6,QP2 
69 S31207 EE-SX771A 3 Original new parts XP242,XP143,CP7 
70 S31208 EE-SX772A 4 Original new parts XP242,XP143,CP7 
71 S3141B DL-S3R 3 Original new parts XP143 
72 S40321 DL-S4R 3 Original new parts XP242,XP143 
73 S4045E EE-SX772R 2 Original new parts NXT 
74 S40545 HPF-S086-A 3 Original new parts QP242 
75 S4077S PM-K44P-C3 , 3M 3 Original new parts NXT 
76 SAM1411 SGM-01A3FJ12 1 Used CP642 
SAM1411 SGM-01A3FJ12 2 Original new parts CP643 
77 SAM6230 SGM-A5A3FJ43 1 Used QP2 
78 SAM6240 SGM-A3A3FJ71 1 Used QP2 
79 VME4400 CP43/IP3 VISION CARD 1 Original USED parts CP43,IP3 
80 WPH0385 CLUTCH 2 USED CP642 
WPH0385 CLUTCH 4 Original new parts CP642 
81 XC-77 CP43, XC-77 CCD CAMERA 2 USED CP43 
82 XS01181 SPOOL VALVE 28 Original new parts NXT 
83 XS01802 SPOOL VALVE 38 Original new parts NXT 
84 SAM6540 SERVO MOTOR,SGMM-A2C3FJ12 1 Original USED parts QP341, 3500.00 
SAM6541 SERVO MOTOR,SGMM-A2C3FJ12 1 Original New parts QP341, 3500.01 
85 ABHPH8070 Retainer Spring 1 Original new parts QP242,QP341 
86 ABHPH8032 Retainer Spring 4 Original new parts QP242,QP342 
87 AWPQ8571 SHAFT SPLINE, 10St. 1 Original new parts CP643 
88 AWPQ8030 SHAFT SPLINE, 12St. 2 Original new parts CP643 
89 K2050E/K2050F FS-30E/FS-30D 1 Original USED parts CP43,IP3, CP642 
90 GPL1141 mirror Bkt-Left 1 Original new parts CP43,CP643 
91 ADBPP8571 PIN BACK-UP 4 Original new parts QP242,QP341, 
92 WPA5152 AIR CYLINDER FOR CP6 0 Original new parts CP643,CP642 
93 W1019T WAHSER 200 Original new parts CP643,CP643 
94 WPA5160 PLATE END, PBR8FN 3 Original new parts CP642,CP643 
95 S4032T SENSOR, UM-T50TV 1 Original new parts QP242,QP3 
96 S3148L HPJ-D21-L05 2 Original new parts XP, QP 
97 S31385 E3X-13A-R-FKS 2 Original new parts QP, IP3 
98 S3122Z SENSOR, E3S-LS3RC4 1 Original new parts CP,XP 
99 H30571 FS-L41 2 Original new parts CP7,CP8 
100 H3007H FU-59(2000) 4 Original new parts CP6,CP7,CP8 
101 DGSS0081 CRB-41W 1 Original new parts CP7,CP8 
102 S2100Z CDQ2A12-15DM-A73L 1 Original new parts QP242 
103 T1065Z DAMPER:KMF80-20-A (T1066B) 1 Original new parts XP143,/XP242 
104 ADCPA8112 MCHA7-25-12-LZ3(DCPA571) +1 3 Original new parts CP7,CP8(1ST.) 
105 ADCPA8132 MCHA7-25-12-RZ2 (ADCPA8121/DCPA0541) 3 Original new parts CP7,CP8(9ST.) 
106 ADCPA8142 MCHA7-28-12-LZ3(DCPA571) 1 Original new parts CP7,CP8(14ST.) 
107 CSQC1350 SWITCH PHOTO,DL-S7507D 1 Original used parts CP642,CP643 
108 S3130A SWITCH PHOTO,PS-47 1 Original new parts CP642,CP643 
109 WPU0330 JOINT,WPU0331 1 Original new parts CP642,CP643 
110 WPH0924 SLEEVE 5 Original new parts CP642,CP643 
111 WPU5712 JOINT 2 Original new parts CP642,CP643 
112 S45714 SENSOR, SH-31R 2 Original new parts IP2,IP3, QP2,QP3 
113 S4571H SENSOR,SH-21 1 Original new parts IP2,IP3, QP2,QP3 
114 S4571T SENSOR,SH-21. SLIT DIA.1 2 Original new parts IP2,IP3, QP2,QP3 
115 S4571Z SENSOR,SH-21E 2 Original new parts IP2,IP3, QP2,QP3 
116 S4030A SENSOR,SS2-300E 2 Original new parts IP2,IP3, QP2,QP3 
117 S4031A SENSOR,SS2-300F 2 Original new parts IP2,IP3, QP2,QP3 
118 S4032A SENSOR,SS3-M1R 1 Original new parts IP2,IP3, QP2,QP3 
 
1 DCGC5710 LENS,FML-28016CD /FML-28016(DCGC0600) 2 Original new parts CP732.CP742,CP842 
2 DCGC5710 LENS,FML-50059CD /FML-50059(DCGC0610) 2 Original new parts CP732.CP742,CP842 
3 ADCGP8571 CCD CAMERA 1 Original new parts CP732.CP742,CP842 
4 K1129H CCD CAMERA XC-55FT WITHOUT LENS 1 Original used parts CP732.CP742,CP842 
5 K2571 SCU-100C for QP242 SCU CARD 1 Original used parts QP242 
6 H1121N VALVE SOL, AXT309-5G-02-X11 1 Original new parts GL5,GL541 
7 S40548 SENSOR FIBER, HPF-S188-A 2+2 Original new parts CP732.CP742,CP842 
8 CSQC5380 SENSOR FIBER, FU-2254 1 Original new parts CP732.CP742,CP842 
9 S2571K/M/H/F LIGHTLAMP BRACKET 5 Original new parts CP732.CP742,CP842 
10 S3152T PRESS SW. VUS10-CJAS 3 Original new parts IP3 
11 MPA1431 HOOK SPRING 1 Original new parts CP642,CP643 
12 H10697/H1070A PCD245-NB-D24** , WITH BRACKET 4 Original new parts CP642,CP643 
13 ACSQL5710 VALVE SOL. F15T2-PS3(F15M2AJ-4W) ASSY 2 Original new parts CP643,CP7,CP8 
14 ACSQL5710 VALVE SOL. F10T4-PS3(F10M2AJ-24W) ASSY 2 Original new parts CP643,CP7,CP8 
15 H10669 VALVE SOL. F15T2-PL3-DC24V ASSY. 1 Original new parts CP643,CP7,CP8 
16 K11323 VGA CCD CAMERA , QP341 LENS HEAD ONLY 1 Original new parts QP341,QP351 
17 WPL0381 JAW 5 Original new parts CP7,CP8 
18 DCPL0192 JAW 5 Original new parts CP7,CP8 
19 DCPQ0180/0190 JOINT,ROD 1 Original new parts CP7,CP8 
20 A1039K AMPERFILER, FS-L71 1 Original new parts CP6,CP7 
21 WPA5150 AIR CYLINDER SPCHA7-25-12-Z3-B 4 Original new parts CP6 
22 S2085H DAD25X40-ZG553Z2-3731W 5 Original new parts CP6 
23 ADGPH2190 VALVE MVD235-ZB2 CP8 7 Original new parts CP8 
21 WPK0300 LEVER 2 Original new parts CP742, CP842 
22 MPJ2220 PAM MATERIALS 2 Original new parts CP6-7-8 
15 S2121R CYLINDER CQSB16-15D 15 Original new parts CP842E 
23 H35711 FILTER P-SC-50UW 2 Original new parts CP842E 
24 H4044T BEARING 6304ZZ 4 Original new parts CP6-7-842 
25 DCPA1333 PIN/BOLT 8 Original new parts CP7-842 
26 DGSY0420 SHEET 2 Original new parts CP7-842 
 

Analytical Approaches to Estimating Contact Pressures in Spline Couplings

A spline coupling is a type of mechanical connection between 2 rotating shafts. It consists of 2 parts – a coupler and a coupling. Both parts have teeth which engage and transfer loads. However, spline couplings are typically over-dimensioned, which makes them susceptible to fatigue and static behavior. Wear phenomena can also cause the coupling to fail. For this reason, proper spline coupling design is essential for achieving optimum performance.
splineshaft

Modeling a spline coupling

Spline couplings are becoming increasingly popular in the aerospace industry, but they operate in a slightly misaligned state, causing both vibrations and damage to the contact surfaces. To solve this problem, this article offers analytical approaches for estimating the contact pressures in a spline coupling. Specifically, this article compares analytical approaches with pure numerical approaches to demonstrate the benefits of an analytical approach.
To model a spline coupling, first you create the knowledge base for the spline coupling. The knowledge base includes a large number of possible specification values, which are related to each other. If you modify 1 specification, it may lead to a warning for violating another. To make the design valid, you must create a spline coupling model that meets the specified specification values.
After you have modeled the geometry, you must enter the contact pressures of the 2 spline couplings. Then, you need to determine the position of the pitch circle of the spline. In Figure 2, the centre of the male coupling is superposed to that of the female spline. Then, you need to make sure that the alignment meshing distance of the 2 splines is the same.
Once you have the data you need to create a spline coupling model, you can begin by entering the specifications for the interface design. Once you have this data, you need to choose whether to optimize the internal spline or the external spline. You’ll also need to specify the tooth friction coefficient, which is used to determine the stresses in the spline coupling model 20. You should also enter the pilot clearance, which is the clearance between the tip 186 of a tooth 32 on 1 spline and the feature on the mating spline.
After you have entered the desired specifications for the external spline, you can enter the parameters for the internal spline. For example, you can enter the outer diameter limit 154 of the major snap 54 and the minor snap 56 of the internal spline. The values of these parameters are displayed in color-coded boxes on the Spline Inputs and Configuration GUI screen 80. Once the parameters are entered, you’ll be presented with a geometric representation of the spline coupling model 20.

Creating a spline coupling model 20

The spline coupling model 20 is created by a product model software program 10. The software validates the spline coupling model against a knowledge base of configuration-dependent specification constraints and relationships. This report is then input to the ANSYS stress analyzer program. It lists the spline coupling model 20’s geometric configurations and specification values for each feature. The spline coupling model 20 is automatically recreated every time the configuration or performance specifications of the spline coupling model 20 are modified.
The spline coupling model 20 can be configured using the product model software program 10. A user specifies the axial length of the spline stack, which may be zero, or a fixed length. The user also enters a radial mating face 148, if any, and selects a pilot clearance specification value of 14.5 degrees or 30 degrees.
A user can then use the mouse 110 to modify the spline coupling model 20. The spline coupling knowledge base contains a large number of possible specification values and the spline coupling design rule. If the user tries to change a spline coupling model, the model will show a warning about a violation of another specification. In some cases, the modification may invalidate the design.
In the spline coupling model 20, the user enters additional performance requirement specifications. The user chooses the locations where maximum torque is transferred for the internal and external splines 38 and 40. The maximum torque transfer location is determined by the attachment configuration of the hardware to the shafts. Once this is selected, the user can click “Next” to save the model. A preview of the spline coupling model 20 is displayed.
The model 20 is a representation of a spline coupling. The spline specifications are entered in the order and arrangement as specified on the spline coupling model 20 GUI screen. Once the spline coupling specifications are entered, the product model software program 10 will incorporate them into the spline coupling model 20. This is the last step in spline coupling model creation.
splineshaft

Analysing a spline coupling model 20

An analysis of a spline coupling model consists of inputting its configuration and performance specifications. These specifications may be generated from another computer program. The product model software program 10 then uses its internal knowledge base of configuration dependent specification relationships and constraints to create a valid three-dimensional parametric model 20. This model contains information describing the number and types of spline teeth 32, snaps 34, and shoulder 36.
When you are analysing a spline coupling, the software program 10 will include default values for various specifications. The spline coupling model 20 comprises an internal spline 38 and an external spline 40. Each of the splines includes its own set of parameters, such as its depth, width, length, and radii. The external spline 40 will also contain its own set of parameters, such as its orientation.
Upon selecting these parameters, the software program will perform various analyses on the spline coupling model 20. The software program 10 calculates the nominal and maximal tooth bearing stresses and fatigue life of a spline coupling. It will also determine the difference in torsional windup between an internal and an external spline. The output file from the analysis will be a report file containing model configuration and specification data. The output file may also be used by other computer programs for further analysis.
Once these parameters are set, the user enters the design criteria for the spline coupling model 20. In this step, the user specifies the locations of maximum torque transfer for both the external and internal spline 38. The maximum torque transfer location depends on the configuration of the hardware attached to the shafts. The user may enter up to 4 different performance requirement specifications for each spline.
The results of the analysis show that there are 2 phases of spline coupling. The first phase shows a large increase in stress and vibration. The second phase shows a decline in both stress and vibration levels. The third stage shows a constant meshing force between 300N and 320N. This behavior continues for a longer period of time, until the final stage engages with the surface.
splineshaft

Misalignment of a spline coupling

A study aimed to investigate the position of the resultant contact force in a spline coupling engaging teeth under a steady torque and rotating misalignment. The study used numerical methods based on Finite Element Method (FEM) models. It produced numerical results for nominal conditions and parallel offset misalignment. The study considered 2 levels of misalignment – 0.02 mm and 0.08 mm – with different loading levels.
The results showed that the misalignment between the splines and rotors causes a change in the meshing force of the spline-rotor coupling system. Its dynamics is governed by the meshing force of splines. The meshing force of a misaligned spline coupling is related to the rotor-spline coupling system parameters, the transmitting torque, and the dynamic vibration displacement.
Despite the lack of precise measurements, the misalignment of splines is a common problem. This problem is compounded by the fact that splines usually feature backlash. This backlash is the result of the misaligned spline. The authors analyzed several splines, varying pitch diameters, and length/diameter ratios.
A spline coupling is a two-dimensional mechanical system, which has positive backlash. The spline coupling is comprised of a hub and shaft, and has tip-to-root clearances that are larger than the backlash. A form-clearance is sufficient to prevent tip-to-root fillet contact. The torque on the splines is transmitted via friction.
When a spline coupling is misaligned, a torque-biased thrust force is generated. In such a situation, the force can exceed the torque, causing the component to lose its alignment. The two-way transmission of torque and thrust is modeled analytically in the present study. The analytical approach provides solutions that can be integrated into the design process. So, the next time you are faced with a misaligned spline coupling problem, make sure to use an analytical approach!
In this study, the spline coupling is analyzed under nominal conditions without a parallel offset misalignment. The stiffness values obtained are the percentage difference between the nominal pitch diameter and load application diameter. Moreover, the maximum percentage difference in the measured pitch diameter is 1.60% under a torque of 5000 N*m. The other parameter, the pitch angle, is taken into consideration in the calculation.

China high quality T1065z CZPT XP142 XP143 XP242 XP243 Kmf80-20 Damper CZPT XP Machine Parts     with Good qualityChina high quality T1065z CZPT XP142 XP143 XP242 XP243 Kmf80-20 Damper CZPT XP Machine Parts     with Good quality