LS Screw Conveyor/Cement Screw Conveyor for Coal, Sand, Silo
Screw Conveyor is the essential equipment of dry mortar mixer plant ,concrete mixing plant,which plays important role in the product line.It is suitable for all industries such as building material, chemical industry, power industry, metallurgy, coal industry and CZPT industry and for horizontal or tilted transportation for powdery, granular and small lump materials such as coal, dust, residue, cement and CZPT which their temperature is less than 200ºC. Screw conveyor is not suitable for materials with perishable, big viscosity and easily caked.
Working Principles :
The motor drives the helical blades by driving reducer in a close steel pipe, to deliver powder and CZPT (cement, fly ash etc) continuously and discontinuously.
Main Components of Screw Conveyor:
Motor, reducer, outer pipe, screw mandrel, middle-hoist bearing, tail bearing, universal joint, charging door flange.Which has the characters of compact design, low noise, good seal and convenient for layout.
Main Technical Specification:
1.Type: Named by the diameter of outer pipe. Larger in diameter, larger in delivery volume.
2.Delivery length (L): Distance between charging door and discharging door, namely the itinerary that materials go through in the conveyor pipe.
3.Delivery angle: Angle between screw conveyor and horizontal plane. The bigger the angle, the fewer volume the conveyor can delivery at the same condition.
4.Delivery volume: delivery capacity per hour, T/H.
5.Connection of charging: Connected by universal ball joint, convenient for adjusting when installation.
|Model||Screw diameter||Screw pitch||n—rotation speed(r/min), allowable deviation<10%|
Features of Screw Conveyor:
A) High quality motor and gear box, with heavy duty design, large torque and low noise.
B) outside tube complete with 1 inlet, 1 outlet, end flange, ball joint , inspection window.
C) standard fitting parts, middle bearing, end bearing, spline shaft coupling.
D) Lifting eyes on each tube section, convenient for transport and installation.
E) small diameter, great efficiency, high throughout rates.
Photos of Screw Conveyor:
Why Choose Us?
1. Quality Price
We have been in this field over 20 years, so we have great advantage in good quality with competitive price.
Top production test equipment and production equipment to guarantee the product quality.Our product can totally meet SGS, BV, CIQ etc. test.
Wooden Box Package with fit for sea ship .
The products can be transported by big shipping company, we buy Insurance Policy for every client.
We offer specialized logistic service including export declaration,customs clearance and every detail during shipment. This makes us CZPT to offer you one-stop service from the order to the products transported to your hand.
FAQ of Screw Conveyor
1: What is the condition to provide a correct offer ?
Kindly provide the filling material size ,density and capacity ,then we will offer it accordingly.
2: What is your acceptable payment term?
3: How about the validity of the offer?
Usually our offer is valid for 1 month. However, validity might vary between different products.
4: What documents you provide?
Usually, we provide Commercial Invoice, Packing List, Bill of lading, and Origin Certificate. Please let us know if you need additional documents.
5: What is loading port?
Usually loading port is HangZhou port, besides, ZheJiang Port, HangZhou Port is totally no problem for us, and also we can ship from other ports as your requirement .
Standard Length Splined Shafts
Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
Disc brake mounting interfaces that are splined
There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
Disc brake mounting interfaces that are helical splined
A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.